Buy Low Price From Here Now
mfr: WATTS BRASS & TUBULAR FLOODSAFE(R) CONNECTORS Protects against catastrophic loss by way of- a broken water connector Actuated by flow of cold or hot water in excess- of the design flow rate indicated on the label Once detected, Floodsafe(R) assumes a burst - and the flow of water is shutoff Resetting Floodsafe(R) connector is easy to- again protect in case of burst pipe MFS2PBSP60-1212 WASH CONNECTOR SIZE:3/4"x3/4"x60" TYPE:Washing Machine
Readmore
Technical Details
- Prevents Flood Damage- Easy to install
- Stainless Steel supply line
See more technical details
By Will (North Carolina)
My Watts washing machine hose was supposed to prevent water damage. After a few months, it put out a fine spray during the fill cycle. it was sufficient to wet the dry wall and soak into the subfloor causing over $6000 in damage, but it was not big enough to cause a puddle on the floor that I could see. The Watts insurance adjuster agreed that the hose appeared to be the culprit and took it for an "independent evaluation". Turned out Watts evaluated its own hose, proclaimed no "manufacturing defect", and refused to return it. So I had no proof. I WILL NEVER BUY A WATTS PRODUCT AGAIN!
By Haggeo Romero
I bought these and they worked fine for a while then i moved and reconnected the hoses and they do not work at all. our new house has very high water pressure since it's directly below the city water supply. this high pressure activated the flood safe valve and it will not reset no matter what. if you get these to work the first time don't ever increase the water pressure or you may be making that long trip to the hardware store. i'm going with braided hose without the tricky valves in them.
By B. Lawrence
I purchased these hoses elsewhere over a year ago, but after coming across all the negative reviews here I felt compelled to add my experience because they worked fine for me. I installed these on an older Maytag washer and they worked as designed. I tested them before connecting to the washer by directing them into a bucket and when I turned on the supply they tripped as expected, shutting off the flow. After resetting them I connected them to the washer and when the supply was turned on they did not trip, nor do they trip when the washer is filling.
They operate on the principle that the appliance has a particular flow rate and anything beyond that is assumed to be a leak. These are tuned to the expected flow rate for a clothes washer (fairly low flow), there is a different hose available for dishwashers (which I assume have a higher nominal flow). My washer fills slowly with or without the floodsafe hoses, I assume the reviewers that had problems have washers with a high flow fill.
I gave these 4 stars instead of 5 only because I suspect a small leak would probably not trip them.
There is a nice video from the manufacturer on youtube explaining how these work and showing them in action.
By D. Welch (Alexandria VA)
Thank you, Amazon customers! I wondered why my machine filled so slowly. I put these on after my divorce and thought the machine sure took a long time to fill. I will buy regular hoses and change them every 5 years.
By Online Aficionado
I've had no issues with this product, it works fine on my Maytag Neptune front-load washer. I am hopeful were the hose to burst, the device would shut off water flow.
Buy Watts MFS 2PBSPL60-1212 FloodSafe 3/4-by-3/4-by-60-Inch Washing Machine Connector, 2-Pack Now
0 Responses to "Watts MFS 2PBSPL60-1212 FloodSafe 3/4-by-3/4-by-60-Inch Washing Machine Connector, 2-Pack"
Post a Comment